Broken bridge aluminum doors and windows company to talk about broken bridge aluminum doors and windows installation matters needing attention

Broken bridge aluminum doors and windows are widely used in modern buildings because of their excellent thermal insulation performance and durability. However, to ensure that its performance is fully utilized, correct installation steps and precautions are essential.

First, make sure you are well prepared. Before installation, the door and window openings shall be carefully checked to ensure that their size, position and verticality meet the design requirements. At the same time, prepare the required installation tools and materials, such as expansion bolts, sealants, gaskets, etc.

Secondly, the correct choice of broken bridge aluminum doors and windows models and specifications. According to the architectural design requirements and hole size, select the appropriate broken bridge aluminum doors and windows model and specifications. Ensure that the opening direction, size and color of doors and windows meet the design requirements.

During the installation process, pay attention to the positioning and fixing of doors and windows. Use expansion bolts to fix the door and window frame on the opening to ensure that the gap between the door and window frame and the opening is uniform. At the same time, use gaskets to adjust the level and verticality of the door and window frames to ensure that the doors and windows are installed firmly and smoothly.

In addition, the sealing treatment is also critical. The gap between the door and window frame and the opening shall be sealed with sealant to prevent air and moisture penetration. At the same time, the gap between the door and window sash and the frame should also be sealed with a sealing strip to ensure the thermal insulation performance of the door and window.

After the installation is complete, check it. Check whether the opening and closing of doors and windows are smooth, whether the hardware accessories are firmly installed, and whether the sealing performance is good. If problems are found, they should be adjusted and repaired in time.

Then, pay attention to the safety precautions during installation. During the installation process, the safety operation procedures should be followed to avoid accidents. Especially when working at high altitude, necessary safety measures should be taken to ensure the safety of construction personnel.

In short, the correct installation is the key to ensure the performance of the broken bridge aluminum doors and windows. During the installation process, the operation should be carried out in strict accordance with the design requirements, paying attention to every detail, and ensuring the installation quality and use effect of doors and windows.